For a shorter back and sides, with length on the top:
•
Attach the longer comb guide as required for the top of your
hair – your clipper is supplied with 8 comb guides (grades 1, 2, 3, 4,
5, 6, 7 & 8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• If you then wish to take the back and sides of your hair to a shorter
length, switch off the appliance and attach a shorter comb guide.
• Starting at the nape of the neck, with the comb guide flat against
the head, move the clipper upwards and outwards over the area you
want to take shorter.
• Repeat on the sides of the hair, starting with the teeth of the clipper
pointing upwards and comb guide flat against the area above the ear,
again moving the clipper upwards and outwards.
Outlining:
• To tidy up the edges around your cut e.g. neckline and sideburns,
detach the comb guides.
• Hold the appliance upside down, so the front of the clipper is facing
towards your head.
• Hold the clipper straight on your sideburns or neckline and move the
clipper downwards. This will give you a clean, smooth finish.
Cleaning & Maintenance
For easy cleaning, the blades on your BaByliss For Men clipper are
removable. Regular cleaning will maintain their high performance level.
To clean proceed as follows:
• Remove the comb guide after use. Rinse under running water and
dry thoroughly before storage or use.
• The clipper blade are removable for easy cleaning. To remove the
blades, hold the clipper with the blades pointing upwards and
push the underside of the blade teeth upwards to remove. Do not
disassemble the blades.
• Using the cleaning brush, brush and blow away any remaining hair.
7471U IB-17/206.indd 8
5/18/17 10:43 AM
