remain on. Unplug the adaptor from the mains socket and appliance
and prepare for use.
Changing the Heads
• Before changing the heads, ensure the appliance is switched off.
• To remove a head, hold the handle of the appliance with one hand, hold
the head with the other hand and pull the head back and away from the
front of the handle.
• To attach a head, the driving pin needs to be in a central position. If it
is not in the centre, manually move the pin into position. Then, making
sure that the base of the head is seated in the handle, click the head
into position. Make sure taper control is set to position number 1 when
changing head.
Comb Guides
6-Position Comb Guide For Precision Trimmer:
• Ensure the appliance is switched off.
• Attach the Precision Trimmer head.
• Slide the smaller of the 2 comb guides onto the front of the Precision
Trimmer head and push down at the rear to lock into place – you will hear
a clicking noise when it’s in position.
• The comb guide will be set to the shortest of the six cutting lengths.
• To adjust the cutting length, push the guide forward to the required
position. The comb guide has 6 length settings: 4mm, 6mm, 9mm,
12mm, 15mm & 18mm.
• To remove the comb, gently lift the guide off the head by lifting the rear
section.
1
2
3
Installing the nose/ear trimmer
• Insert the pin of the trimmer body into the hexagonal hole
of the trimmer head as shown in Fig.1.
• Press and snap the trimmer head onto the body as shown
in Fig. 2.
• Detaching the nose/ear trimmer:
• Hold the trimmer in the way as shown in Fig.3 with the
thumb pressing the top front part of the trimmer head and
snap it off.
17_7426BU_IB.indd 6
3/24/17 10:33 AM
