STEP 9.
STEP 10.
Position the drawer back (M) on the drawer assembly
and secure it with woodscrews (T).
page 6
STEP 10B
STEP 10A
Slide the bearing glide rails out fully as illustration
STEP 10A shown.
Position the drawer on tabs on the glide rails. Attach
the drawer to the rails with four 3/8” Phillips head
secrews (U) as illustration STEP 10B shown.
Make sure that the
drawer is placed on the
tabs on the glide rails.
Screw the
3/8” Phillips head secrews (U) in the
pre-drilled holes on the drawer side panels .
The rails
should not align
with the front of
the drawer.
Do not overtighten the screws.
M
T
T
T
V
