baby
leaf
Freedom of baby care
18
5. Place the PU at a reasonable distance away from BU to avoid feedback. Too
close a distance will create a screeching sound at the speaker 12.
6. Once the PU receives a signal, the icon screen will light up and depending the
signal is coming from which BU, the corresponding baby unit no. will show up
together with other information (room temperature, battery level, starry night
projector status) of that BU.
N.B. In case the PU is paired to only one BU, the icon screen will not
show the baby unit no.
7. The speaker 12 volume can be adjusted using the buttons 15 16.The
temperature reading also change correspondingly during adjustment to show
the level ( 1 to 5) being selected. When the level is set to minimum and the
show up on icon screen, the speaker 12 is totally muted. Under such circum-
stances, the parents can still monitor the baby activities by looking at the
sound level meter.
8. If the PU is paired to work with two BUs, BU no. 1 always has top priority. This
means while the unit is listening to signal from BU no. 2, in case BU no. 1
starts transmitting, PU will immediately switch listening to BU no.1 until it stops
to transmit, then it will switch back to listen to BU no.2.
9. To avoid parent missing the attendance to BU no.2, while PU is listening to
signal from BU no.1, in case BU no. 2 starts to transmit, “2” will show flashing
on icon screen to alert parent. If parent prefers to listen to BU no. 2, he can
short press button 13 and PU switches listening to BU no.2 while “1” go
flashing (if BU no. 1 still transmitting). Further press of button 13 will switch
back to BU no. 1 again. Under such arrangement, the parent is able to monitor
both babies.
10. Under standby mode, the PU will alternately scan between the two BUs for
activities. When either one of the BU starts to transmit, the PU will immediately
listen to that BU and the icon screen will only show information from it until the
signal goes off.