• As shown in gure 1, position the base at the
preferred height; lower; middle or upper and
insert the bolts part way to stop it from moving
• Insert two barrel nuts into the holes in one
corner of the base and align the slots with the
bolts (M6*60 mm)
• Once aligned, screw the bolts and plastic
washer into the barrel nuts, but do not fully
tighten at this stage. Repeat the same process
for the other corners
• As shown in gure 2, attach the
side rail of the cot and use bolts
(M6*60 mm), plastic washer and
one barrel nut at each corner to
t them into place. Fully tighten
all the bolts to keep all parts in
place
1a
1b
2
2
Figure 1
Figure 2
