1a
Cot Bed Mode :
Step 1:
As shown in gure 1, Connect the head
and foot boards with the back side of the
cot with bolt (M6*60mm), washer and
barrel nut. Insert the bolts part way to stop
the setup from moving.
gure 1
2b
1b
Step 2:
As shown in gure 2, insert two barrel nuts
into the holes in one corner of the base
and align the slots with the bolts (M6*90
mm).Once aligned, screw the bolts and
plastic washer into the barrel nuts, but do
not fully tighten at this stage. Repeat for
the other corners.
gure 2
3
Step 3:
As shown in gure 3, attach the
front side to both head and foot
boards using one bolt (M6*60 mm),
plastic washer and one barrel nut
at each corner. Finally fully tighten
the side and base bolts.
gure 3
2a
1a
1b
2b
1b
1a
2b
3
