Know Your Product Well
Seat
Wheels
Height adjustment bar
Chassis
Panel
Musical Toy Tray
Push bar
Assembly Instructions
Unfold
Fix the base and pull the panel up to the
needed height level, make sure the safety
device is in locked state.
Install Wheels
Install the wheels in the chassis by hands. It
doesn't required any auxiliary tools for tting.
Adjust the Height
As shown in picture, x the base then press down
or pull up the panel to the needed height, make
sure the safety device is in the locked state.
Install Seat Cushion
Insert the plastic bolts into the holes around
the panel. Put the plastic stick through the
seat clothes hole and then tighten it with
screws.
Install the Battery Music
Install two batteries, press any one of the key for
music. For changing the batteries, open the cover
of battery box, take out the used battery and put in
the new ones. Then put the cover back and lock it
with the screw.
Panel Adjustment
Reconstruction in Rocking Base
When using rocking function
Turn the white knob to open state. Press two red buttons on
one side of the chassis and then turn the chassis in inward
direction. Same procedure applies for the other side.
Install the Parent Push Bar
Insert the bar into the hole located
at the backside of the walker.