Babyhug BGBC007 User Manual Download Page 4

Carrying the Baby On The Back (6 ) 

Step 2: 

Have a second person hold the baby at your back. Pass the 
shoulder straps over your shoulders, crossing at the front and 
fasten the buckles on both sides. At the same time fasten the 
waist belt too. 

Step 3: 

Adjust the straps till both you and the baby feel comfortable.

Step 1: 

Place the carrier on a  at surface. Place the baby into the carrier 
and attach the fastenings and buckles 

• 

If the baby falls asleep in the carrier, turn the baby' head

 

sideways to provide an unobstructed source of air

• 

There should always be room between the baby's face and your 

 

chest to ensure a clear source of air

Warning:

5

6

The Facing Out Position

The facing out position is perfect when your baby can support 
his/her own head and is ready to explore. This position gives your 
baby the best of both the worlds - the comfort and security of 
being held by you and checking out the things in the world 
around.

Step 2: 

Sit down and release one side of the head support. Unbuckle the 
side opening and detach Velcro fasteners. Carefully slide the 
baby into the carrier and hold him/her facing away from you.  

Step 4: 

Fasten buckles over the Velcro side opening and the head 
support buckles. Adjust the head support straps until the baby's 
back is snugly against your chest. The baby should not lean 
forward. (Make sure that the baby's arms are in the arm holes. For 
bigger babies, the arms can comfortably rest over the sides of 
the head support.) 

Step 3: 

Make sure each of the baby's legs are in the leg opening. Fasten 
the Velcro fasteners. 

Step 5: 

While supporting the baby's weight with one hand, pull on the 
end of the webbing strap to adjust  t. Leg opening should be 
adjusted to the smallest possible size. Before releasing your hold 
on the baby and standing up, ensure that all the buckles are 
securely fastened.

Note: 

For both the facing in and out positions, adjust the carrier till  the baby is high on 
your chest or at a height where you can easily kiss the baby's head.

Step 1: 

Pass the shoulder straps over your head, crossing behind your 
back and fasten the buckles at both sides of the carrier. At the 
same time, fasten the waist belt 

Summary of Contents for BGBC007

Page 1: ...me Finally put the baby and the carrier on a soft surface and unfasten all the buckles to take the baby out STYLE CODE BGBC007 baby carrier Carrying Capacity Up to 9 Kg Age group 0 Months Embrace 3 in 1 Baby Carrier Please read the instructions carefully before use and keep this manual for future reference Made in China Imported Marketed By Brainbees Solutions Pvt Ltd Corporate Registered Office Add...

Page 2: ...r as a child restraint in a motor vehicle or as a car safety seat The carrier is not suitable for use while cooking skiing running or riding a bike While using this carrier do not participate in any strenuous sports activity If you have to stoop while using the carrier with the baby in it bend at the knees and not at the waist The product is subject to normal wear and tear Check the carrier often ...

Page 3: ... one hand fasten the side support buckles Before releasing your hold on the baby and standing up ensure that all the buckles are securely fastened The Facing In Position The facing in position is a perfect way to keep your baby cuddled against you and provide close contact and attention babies need The wrap around head support cradles baby s head and neck The facing in position helps in parent bab...

Page 4: ...e head support Unbuckle the side opening and detach Velcro fasteners Carefully slide the baby into the carrier and hold him her facing away from you Step 4 Fasten buckles over the Velcro side opening and the head support buckles Adjust the head support straps until the baby s back is snugly against your chest The baby should not lean forward Make sure that the baby s arms are in the arm holes For ...

Reviews: