19
EN
Folding the Emotion pushchair
In order to fold the chassis, press
the release button located on the
front left side of the handle and
then lift both levers located on the
back. Use illustration 5 as your
guide to the proper movements.
Once you have all the buttons
pushed, the chassis is released –
held by the handle – and you can
rotate the upper chassis towards
the back wheels in the direction
shown in illustration 6. Make
sure that the folding obstructer is
attached as shown in the close-
up of illustration 6.
The pushchair can be folded in
two ways:
-If you leave the front wheels as
shown in illustration 7, you can
leave the pushchair standing
when folded.
-However, if you fold them as
shown in the close-up of illustra-
tion 8, you can place it inside the
transport bag and pull it so that it rolls
on the back axel (illustration 8).
Remember not to activate the
brake if you choose this option.
If you would like to make the
folded pushchair smaller, we
recommend that you remove the
front and back wheels, as shown
in illustration 9. First, press the
stopper and then remove the
wheel.
The pushchair can be folded with
or without the hood.
You will be unable to fold the
pushchair properly if the front
wheels are in the blocked posi-
tion.
How the brake works
The brake is activated using the
pedal located on the pushchair’s
back wheel. To stop the push-
chair, gently press on the back of
this pedal, as shown in illustra-
tion 10a. The brake works simul-
taneously on both back wheels.
To release the brakes, press
the same pedal on the back, as
shown in illustration 10b
.
Blocking the front wheels
The front wheels can be prevent-
ed from rotating if they are blocked
using the safety located behind each
of their axels (illustration 11). If the
safety is lowered (position 0), the
wheels can rotate freely, but if it
is raised, the wheels are blocked
and cannot rotate around the axel
(position 1).
Regulating the footrest
The footrest has two positions.
To change it in the lower position,
all you have to do is raise it until
you hear the click. If you wish to
put it back in its original position
(illustration 12), press the buttons
located below the seat (1) and
rotate the footrest (2).
Securing your child
Remember that your child should be
secured using the 5-point harness
as soon as you seat him or her in the
Emotion pushchair (illustration 13).
Slide the middle belt (1) between
your child’s legs and put his or her
arms between the shoulder belt
(3) and the waist belt (2). Once
you have done this, join these
three belts using the harness
restraints. Make sure you hear a
click, which will indicate that ev-
erything is properly secured. The
secondary harness (4) could be
used to add an additional safety
system.
INSTRUCTIONS FOR USE
/
