Erfahren Sie mehr über BabyBubu! Discover more about BabyBubu!
4
! Important: Please check carefully that the base plate
with slots is arranged in the same way as the one
already mounted, only then fix the base plate with the
snap hook! Arrangement must be aligned with the
markings of the base plate !
(see picture 4).
11 Now position the spring eyelets to the respective slots
of the base plate in the same way as the other side
(see picture 3).
! Important: It must be ensured that the safety rope is
running down in the middle between the springs !
(see pcs. 1 and 3)
12. Pass the mounting ring completely through all of the
projecting spring eyelets, it should be fully
“closed“ on completion (see picture 5).
13. Now pull the spring cover over the spring system
(see picture 6).
14. Next attach the upper snap hook to the chain of the baby
hammock you are using (see picture 7).
15. Hook the rotating swivel* onto the lower snap hook.
If you use an original BabyBubu Baby Hammock, the
swivel will already be in place.
16. Below the rotating swivel* there is a safety carabiner, on
which the BabyBubu Baby Hammock is suspended
(see picture 8).
Picture 6
Picture 7
Picture 8
* = If you already own the BabyBubu Baby Hammock, the accessory
parts marked with “*“ already exist and consequently they need
no enlargement.
GB
