Insert plug into wall outlet.
Lift water tank to remove from Base.
Remove Water Tank Cap and Fill Water Tank with purified water. Replace Cap.
Make sure Steam Tank Lid is locked in place by turning it clockwise.
Lock Water Tank on Base by firmly pushing down.
Place Blade in Bowl by sliding the Blade on the Driveshaft without turning it.
See blade position detail on page 5.
Always make sure Driveshaft and Driveshaft Gasket are properly inserted and locked
into Bowl before steaming or blending. Use of the machine without the Driveshaft and
Gasket will result in damage to the Bowl and Base.
Add desired ingredients to Bowl, close Bowl Lid securely by turning clockwise.
(See “attaching Lid and Bowl” below.) Make sure safety tab on Bowl Lid is fully inserted
into Base or machine will not start.
4
3
Steam and Blend - Automatically blend after steaming:
Steam Only:
Reheat & Defrost:
Blend Only:
Clean all parts before first use
1
2
3
How to Use
Cooking & Controls
Fill water tank,
turn over and
lock on to
Base
Add ingredients.
Select cooking option
with the control panel
and press start.
Press “steam + blend” repeatedly until desired cooking time is selected. Each press
adds 5 minutes to the steam time, up to 30 minutes. Total steam time will be indicated
on LCD screen.
Press “start” button to begin the steam cycle. Once the steam cycle is complete, the
blend cycle will run for 30 seconds and the machine will shut off.
For a smoother consistency, press and hold the “blend” button to blend more.
Use the steam function to reheat and defrost. See Steam Only instructions above.
Attaching Lid and Bowl
Press to steam only.
Press and hold
to blend.
Press to start
chosen function.
Press stop button
any time to stop functions
and clear LCD.
Press to automatically blend after steaming.
Turn lid
clockwise
to lock on to bowl.
Turn bowl clockwise
to lock on to base.
Turn bowl counter-clockwise
to release from base.
Turn lid
counter-clockwise
to release
from bowl.
Unlocked Position
Locked Position
unlock
lock
LCD - indicates function, and time.
If you would like to steam without the automatic blend cycle, press the “steam” button
repeatedly until desired steam time is selected.
Press the “start” button to begin steam cycle. Machine will beep 3 times and shut off
when steam cycle is complete.
Make sure Bowl Lid is locked onto Bowl. Press and hold “blend” button until desired
consistency is achieved. Do not remove lid when blade is moving.
Clear protective film on control panel can be removed if desired
