7
It is very important to de-scale this appliance every 4 weeks to ensure that it continues to work properly.
Pour all remaining water out of the water chamber. To de-scale, mix 2oz (60ml) of white vinegar with
4oz (120ml) of cold water into the water chamber, and then run one heating cycle on setting 5 until
any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.
DE-SCALING THE BOTTLE WARMER
DEFROSTING FROZEN MILK POUCHES
Then press to begin heating.
To use the defrost setting, place a frozen milk pouch into the warmer and fill water to the line of the milk in the pouch.
CLEANING THE BOTTLE WARMER
Unplug the bottle warmer and
remove the bottle tray from the
base.
Carefully pour out any remaining
water inside the base.
1
2
Wipe all parts dry before next use.
If necessary, wipe base exterior
with damp cloth.
Do not use scouring
pads, abrasives or solvents for cleaning.
3
2
Always allow warmer to cool before cleaning
Press the temperature setting until the “F” icon is displayed on the LCD screen,
8
Possible Remedy
Warmed bottle is too cold.
(Quick & Steady warm
settings)
Try a higher setting according to your preference.
Ensure that bottle tray is lined up with bottle tray
slots in the bottle warmer.
Turn on the Bluetooth connectivity in your mobile
device before syncing to the unit.
Mobile device needs to be within 20ft of the bottle
warmer.
Ensure that plug is securely inserted into the power outlet.
TROUBLESHOOTING
Condition
Possible Cause
Unit will not power on.
Unit is unplugged.
is held for too long.
Bottle Tray is misaligned inside bottle warmer.
Bluetooth connectivity in mobile device is not
turned on.
Mobile device is out of range.
Lid will not close.
Press to turn on the unit. Do
not
hold down the
button.
Machine will not sync to
mobile device or is
disconnected.
Warmed bottle is too hot.
(Quick warm setting)
Not enough water added to bottle warmer.
Setting time is too long or incorrect setting
chosen.
Add water to the marked Quick Warm fill line.
Try a lower setting according to your preference.
Warmed bottle is too hot.
(Steady warm setting)
Not enough water added to bottle warmer.
Setting time is too long or incorrect setting
chosen.
Add water until it matches the height of liquid in your
bottle.
Try a lower setting according to your preference.
Too much water added to bottle warmer.
Setting time is too short or incorrect setting
chosen.
Reduce water in bottle warmer to the required height
based on your setting. (Refer to page 5).
“E5” error displays on machine
or “Error” message displays on
app.
Little or no water has been added to the
machine.
Add cold water to the machine and let it sit and cool for
5 min. Empty out cold water and restart the bottle
warmer. Make sure to add the appropriate amount of
water needed for warming.
E1, E2, E3, or E4 error displays
on machine.
Internal malfunction in machine.
Please contact customer service before continuing to
use your machine.
If you can not remedy problems with the machine by using the troubleshooting chart above, do not return your warmer to the store,
please contact Customer Service at: 1-800-667-8184 or by email: [email protected].
