1. Parts Description
Bell Mouth
Bell Mouth Cushion
Pump Body
Pump Chamber
Silicone Diaphragm
Pump Cap
Silicone Valve
Milk Bottle
Bottle Stand
Bottle Cap
Tube
Motor Unit
Adapter
Breast Pump Instruction Manual
Model : BBP10
Setting 1
Setting 3
Setting 2
Setting 4
Mode
Button
ON/OFF
Switch
2. Safety Precautions
• Read this instruction manual carefully before using the product,
and save it for future reference.
• Before plugging in the product adapter, check that the electrical
rating shown on the rating plate corresponds with your household
electricity supply.
• Only use the adapter provided with the product.
• This appliance is not intended for use by persons (including
children) with reduced physical sensory or mental capabilities,
or lack of experience and knowledge, unless they have given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Do not use appliance during the period of pregnancy as it may
lead to miscarriage.
• Unplug the adapter when the product is not in use and before
cleaning.
• Household use only.
• Never operate the appliance unattended, or use it in unintended
usage.
• Do not immerse the product or adapter into water or other
liquids.
• Put the motor unit on a flat surface to prevent it from falling.
• Do not expose the product and milk bottle to high temperature
environment such as sunshine or a heat radiator.
• Do not let product be in touch of high temperature surface.
3. How to Use
Before the using the breast pump for the first time, please spend
some time to go through this user manual, and save it for future
reference.
This is designed for expressing milk in a safe and convenient way.
The amount of expressed milk depends on the physical condition
of the mother.
Breast Pump:
1. Clean and prepare properly before expressing milk.
2. Press and hold the ON/OFF button for 2s, the display flashes 3
times and shows the working time of the last operation. Then
it will start working with the mode and speed of the previous
operation (the memory feature only works when the power is not
interrupted between operations).
3. During the operation, the mode can be swapped between
Massage Mode
and Express Mode , and the speed can
be changed from Setting 1 to Setting 4.
4. The speed setting should be adjusted until the user feels
comfortable.
5. Special Note: The Bell Mouth Cushion should be tightly pressed
against the breast to prevent the milk from leaking or poor
suction performance.
6. Special Note: Do not directly pull out the breast pump from the
breast when the product is operating in Express Mode. Switch off
the product and use a finger to pry open the seal between the
Bell Mouth Cushion and the breast.
7. Using for the first time, press and hold the ON/OFF button for
2s. The display flashes “00:00” 3 times, and the product starts
working in Massage Mode and Setting 4. If no button is pressed
within 2 minutes, the product will change to operate in Express
Mode and Setting 2.
8. The product is powered by AA x 4 1.5V batteries, or the Adapter.
If the Adapter is plugged in with the batteries inserted in the
product, the default power source is the Adapter.
9. Special Note : Confirm the input voltage and the output voltage
of the Adapter.
10. Please protect the environment. Do not expose batteries to
sunshine. Never dispose batteries in fire or country side. Avoid
using old and new batteries together. Follow the local legislation
for environment protection. Dispose of the product and batteries
at an appropriate waste treatment centre.
4. Cleaning & Maintenance
1. Warning : To avoid risk of short-circuit or electric shock, do not
disassemble the Adapter and the breast pump or immerse it into
water. Unplug the Adapter before cleaning.
2. Clean the surface of the breast pump with clean damp cloth.
3. Do not use detergent or corrosive agents to clean the breast
pump and the Adapter.
Expressing Mode
Setting
Time (
min
) Milk Vol. (
ml
)
1
10
82
2
10
100
3
10
120
4
10
150
Inserting & Taking Out Batteries
1. Insert 4 batteries (AA size) according to the indicated directions.
2. Pull the tape to take out the batteries.
