Step 3: Connecting the buggyboard to your pram
7
Engage the brake.
Loosen the bolt on the underside of the board, counter clockwise until it’s
released and open.
Remove the foam from inside the clamp and attach it to the middle of
the thin axel bar (not the movable brake bar).
Entering from the side of the axel (to allow the bolt to easily pass
between the pram frame and axel bar) attach the clamp over the foam,
lock the bolt back into place, and then tighten.
To remove the buggyboard from your pram, unscrew the bolt by
turning it counterclockwise until it comes out and the mechanism opens.
