background image

3

Safety first

MUST READ BEFORE INSTALLATION AND USE

   

   This product is suitable for 

children 2+ years of age. 

Every child is different, 

please assess whether your 

child is safe and secure 

either sitting or standing 

before walking with the 

Orbit Board in use. 

2  To prevent injury from 

choking or suffocation, 

carefully remove and move 

out of reach all protective 

packaging. Never leave 

your children unattended 

with the Orbit Board or 

packaging. 

3  Keep children clear from 

the Orbit Board whilst you 

are attaching or adjusting it.

4  Always apply the stroller 

brake before attaching 

the Orbit Board, loading or 

unloading your child.

5  The Orbit Board is designed 

for children’s use only, one 

child at a time.

6  Children must sit on the seat 

only (not sit on the board).

7  The Orbit Board is not a toy 

and should not be played 

with.

8  Only use with models of 

strollers and accessories 

approved for use by 

babybee prams.

9  Do not use unauthorized 

spare parts. 

10  Do not use on public 

transport.

11  Do not use if any part of 

the Orbit Board is broken or 

damaged. 

12  When seated, ensure your 

child’s feet are clear of the 

ground, wheels and brake. 

13  Always hold on to your 

stroller while the Orbit Board 

is in use to avoid instability.

14  Ask your child to get off 

when using on steep or 

unstable surfaces and up or 

down curbs.

15  Do not allow your child to 

play with the stroller brake 

or wrist tether strap.

The safety of your family is our number one priority. Please take note
of the following safety warnings:

Summary of Contents for Orbit Board v2













Reviews: