Babyauto IrbagTop DS05, Instructions For Use Manual

Page: 29 / 60

29 29 www.babyauto.com Group 0/1
Ensure that the belt has no slack.
IMPORTANT
5. Fasten the seat belt into the vehicle´s buckle until
it “ clicks” , making sure the child seat is properly
installed (3.9).
6. Tighten the lap belt and diagonal shoulder belt, then
place the red safety clip N on the diagonal shoulder
belt tongue as near to the vehicle anchor point as
possible without touching it! (3.9, 3.10, 3.11 y 3.12).
Make sure the vehicle’s safety belt is not twisted,
also check that the seat cover does not impede the
movement of the vehicle’s safety belt or prevent
the installation of the seat in any way. To release
your child unbuckle the vehicle safety belt as
described in the instructions.
4. INSTALLING CHILD SEAT. GROUP 1.
Only suitable for Group 1 , approx.
9 months to 4 years of age (9-18 Kg.)
WARNING
Installing the child seat forward facing can only be maid
if the child is more than 9 kg.
1.
To install as Group 1 , the seat must be in its most
upright position to adjust reclining angle of the child
seat, pull the control red handle J towards you until
the desired position is achieved (3.1).
2. Take of the 0 basic and change is postion, then press
it inside you will hear a “ click ” (4.1).
3. Fit this child seat into the vehicle´s seat, making sure
it is firmly pressed against the vehicle seat backrest
(4.2).
EN