(AA) 1/4" X 1-3/4" BOLT =4 PCS
LOCK WASHER
STEP #1
LEG ASSEMBLY TO HEADBOARD AND
FOOTBOARD ASSEMBLY
STEP #1.1
Gently lay the Headboard and Footboard on their
backs on a clean and non-abrasive surface.
STEP #1.2
Align and insert the threaded rod of the Legs into the
hole on the bottom of the Headboard and Footboard
and turn clockwise to tighten. Please see DETAIL A.
STEP #1.3
Bring the Headboard and Footboard and the
Stationary Side Rail to upright position.
NOTE:
At both ends of the Stationary Side Rail are holes for
the bolt to pass through which correspond with the
holes on inside surface of the Headboard and
Footboard with pre-installed nut.
STEP #1.4
Align the hole of the Stationary Side Rail into the hole
of the Headboard and Footboard then insert the Allen
head bolt into hole and turn clockwise to tighten.
Tighten the bolt with Allen wrench Provided. Please
see DETAIL B.
Note: DO NOT OVER TIGHTEN
HARDWARE FOR STEP #1:
DETAIL A
DETAIL B
Page 6 of 10
