Position the Mattress Support (6)
between the Stetcher Bars (4) and align
the holes. Attach with Mattress Bolt
(BB), Flat Washer (CC), Spring Washer
(AA), and Mattress Nut (FF). Tighten
with Multi Wrench (EE) and Allen Key
(KK).
Page 7 of 9
ASSEMBLY INSTRUCTIONS
STEP 2
Note:
The Mattress Support (6) is easily adjustable to
varying heights by loosening and removing all of
the hardware (EE, FF, KK, MM) from all four
corners of the current level and inserting into a
different hole for higher or lower level.
Place the support at the highest setting for
newborns, then adjust to lower positions as the
child grows and becomes mobile. Once the child
is able to stand, the Mattress Support (6) should
be at its lowest setting.
STEP 3
