Page 8 of 10
FIGURE 09-A
STEP #8.
BUNK BED ASSEMBLY
STEP #8.1
On top surface of Lower End Panels (A) are
holes for Steel Dowels (9) that correspond
to the holes in the Legs of the Upper Bed (D).
Insert Steel Dowels (9) Into top of Lower End
Panels (A) as in FIGURE 08-A.
STEP #8.2
Gently lift up the upper bunk and align and
insert the Steel Dowels (9) into the holes in
the bottom of the Legs of upper bunk. Refer
to FIGURE 08-B.
STEP #9
.
LADDER ASSEMBLY
STEP #9.1
On inside surface of the Ladder (I) are metal
brackets pre-installed with holes for the
Screws (7) to pass through. Hook the metal
brackets of the Ladder into the Upper Side
Rail (E) as well as the brackets on Lower
Side Rail (B); Once the Ladder (I) is set,
fasten the Ladder (I) with Phillips Wood
Screws (7) provided as in FIGURE 09-A and
FIGURE 09-B.
FIGURE 08
FIGURE 09-B
