STEP #5
TODDLER RAIL ASSEMBLY
STEP #5.1:
On inside face of both End Rail Panels are holes with
insert nut pre-installed and holes for the wooden
dowels to pass through which corresponds to the holes
on both ends of the Toddler Rail and pre-installed
wooden dowel. Fasten the Threaded Rod manually into
the insert nut on both End Rail Panels. Insert the
wooden dowels of the Toddler Rail into the hole of both
End Rail Panels as well as the Threaded Rod of End Rail
Panels into the holes of the toddler Rail. Insert Curved
Washer, Lock Washer and engage Hexagonal Nut.
Tighten all the nuts with Wrench provided. Please see
DETAIL C .
NOTE: Fill the holes located on top of both End Rail
Panel with Allen Head Bolt (DD) provided.
DD
Page 5 of 7
DETAIL C
