2
ASSEMBLING
PARTS
TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE
INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
*
Remove stroller from box. The front wheels, rear wheels, child
tray and parent tray need to be installed prior to use.
* To attach the front wheels, unfold stroller as described in the
section following. See figure 1.
* Lean the stroller backwards so that it rests on the handle and rear
frame tubes and the front wheel bayonets are pointing upward.
* Push each front wheel onto the front wheel bayonet until snapped
into place. Pull on the wheel to ensure that it is securely attached
to the stroller. Please see figure 2.
* Assemble the rear axle as follows. Insert the axle through each
wheel, with axle going through the brake cluster on the wheel first.
Snap the small lock washer onto the grove at the end of the axle to
lock the wheel on. Snap the locking cap over the lock washer.
Lastly, snap the hub cap into place. Pull on each wheel to ensure
that each is securely locked onto the rear axle. Please see figure 3.
* Lean the stroller forward to rest on the front wheels. To attach the
rear axle, line up the rear frame tubes with the rear axle housing
with the brake pedals facing toward the rear of the stroller. Push
both housings onto the rear frame tubes at the same time until they
snap into place. Check that the push button shows through the
small hole near the bottom of the inside of the housing. Make sure
that the axle is firmly attached to the stroller. Please see figure 4.
Fig. 1
Fig. 2
Fig. 3
Push Buttons
Fig. 4
Stroller
Front Wheels
Child Tray
Parent Tray
Axle
White Locking Cap
Dark Solid Cap
Rear Wheels
Hub Cap
