Seat Back
Height Brackets
Tray Insert
Tray
Crotch Retainer
Legs
4 Casters
(2 with brakes)
Footrest
Seat Brace
Seat Base
Seat Back Hinge Rod
Recline Fittings
Upper Frame Assembly
1 (5mm x 10) Black Screw
4 (3.5mm x 10) Screws
Toy
1
2
3
4
6
7
8
1
1. Slide recline fittings onto the ends of the recline
mechanism rod as shown in figure 1.
2. Place the seat base on a flat surface as shown in figure 2.
3. Join the seat back to the seat base using the seat back
hinge rod as shown in figure 3. The rod is inserted from
right to left as shown.
4. Insert the
(5mm x10)
screw into the end of the seat back
hinge as shown in figure 4. This screw prevents the
unintentional loosening of the hinge rod. Tighten the
screw until snug:
DO NOT OVER-TIGHTEN
.
Recline Fittings
Recline Mechanism Rod
Figure 1
Figure 2
Figure 3
Figure 4
CONTENTS
ASSEMBLY
3
10
13
14
15
5
11
12
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16
9
