* Carefully place the child in the stroller seat and bring the seat belt around
the child’s waist. Place the crotch strap between the child’s legs. Insert the
male end of each waist belt into the buckle on the crotch strap. Tighten
the seat belt to be snug around the child’s waist. Please see figure 14.
WARNING:
Avoid serious injury from
falling or sliding out. Always use the seat belt.
* To release, apply pressure to both sides of each male clip until the clip
is released. This process requires a moderate amount of effort so as to
prevent an accidental release by your child. Please see figure 15.
5
Figure 14
.
TO SECURE THE CHILD
ATTACHMENT OF THE BABY TREND INFANT CAR SEAT
* To attach the Baby Trend Infant Car Seat, place seat back in the partially
reclined position as described in the seat back positioning section
following. Please see figure 22 and 23.
*
Check that the front child tray is firmly attached to the stroller
armrests.
Pull rearward on the rear edge of the front child tray cover
while lifting upward on the tray cover. Please see figure 16 and 17.
Remove the tray cover and store in the pocket in the rear of the seat.
Please see figure 18.
* Position the Infant Car Seat, facing toward the rear of the stroller, so
that the seat shell goes into the front tray and latches into place. The
sides of the car seat will rest on fold joints. Please see figure 19.
Check
that the Infant Car Seat is firmly locked onto the front tray before
using.
* To remove the Infant Car Seat, squeeze the release handle located at the
foot-end of the seat and carefully lift upward on the seat. Please see
figure 20.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Rest on
fold joints
Locks
into tray
