4
WARNING:
NEVER leave child
unattended. The backpack is not intended to be
used as a chair and may become unstable.
* Unbuckle the safety harness.
* Adjust the seat height by tightening or loosening the webbing just ahead of
the crotch strap. See figure 6. The higher position should be used by
younger shorter child. The lower position should be used for an older
taller child. The child should be positioned such that the top of their head
is below the top of your head. See figure 7.
* Select either the upper or lower attachment point for the shoulder belts.
The attachment point should be at or below the level of your child’s
shoulders. To change to the other attachment point, unthread the belt
through the adjustment buckle, re-position to the other attachment point,
and re-thread the buckle. See figure 8a and 8b.
* Carefully place your child in the Backpack being careful to hold the
Backpack upright. Make sure that the child’s feet go through the leg
openings completely.
* Pull the crotch strap up between the child’s legs and buckle the safety
harness around your child. Tighten the crotch strap so that the waist strap
is positioned just above the child’s legs. Tighten the waist strap to be snug
around your child. Lastly, tighten the shoulder straps to be sung across the
child’s shoulders. See figure 9.
Fall Hazard: The Safety Harness is designed to keep your child safe in
the Backpack. The harness may be defeated by a determined active
child who is intent in attempting to climb out of the Backpack. Do Not
use the Backpack if your child is too active or attempts to stand up in
the seat.
* Snug your child in by tightening the side adjustment straps. See figure 10.
�
TO INSTALL CANOPY:
* The canopy has an in use position as well as a storage position on the
Backpack. See figure 11 for the positions.
Fig. 6
Fig. 7
Fig. 9
Fig. 10
Fig. 11
Fig. 8a
Fig. 8b
Use Position
Storage Position
