background image

29

30

Copyright © 2016, Baby Trend, Inc.

Copyright © 2016, Baby Trend, Inc.

 5.0  Installation and Use

 5.0  Installation and Use

5.6  Forward Facing Installation with Lap Belt and Top Tether

Requirements. See section 2.3:
Weight is 23 - 65 lbs (10.43 - 29 kg)
Height is 50 inches (127 cm) or less.
Age is 1 year old.

1. Ensure that the harness is adjusted to position 3 

or 4. Only use recline positions 5 and 4 in forward 

facing positions.

2. Ensure vehicle is level and that the Convertible is 

placed flat, and rests on the front outer edge of the 

vehicle seat.

3. Lift back flap and place harness to side.

Top Tether

 

Rear of Vehicle

4. Route auto belt through forward facing belt 

path.

5. Put weight in seat with hand to compress 

the automobile seat cushion then insert the 

buckle tongue into the buckle and adjust seat 

belt as tight as possible. Pull up on buckle 

tongue to ensure the buckle is secure.

5. Lower flap and secure hook and loop 

fasteners.

6. Attach Top Tether to a designated anchor 

point. Pull Top Tether strap until webbing 

strap is snug. 

NOTE: Your vehicle owner’s manual will 

give the anchor locations and maximum 

weight of the restraint’s occupant for LATCH 

connections.

7. Check for movement of the restraint at the 

safety belt path. The restraint should not 

move more than 1 inch in any direction. If the 

restraint moves more than 1 inch repeat all 

steps until all safety steps are met.

Summary of Contents for CV88A

























Reviews: