background image

Remove stroller from box. 

•    Unfold stroller as described in the section following.  See 

fi gure 10.  

•    To attach the canopy, clip the canopy brackets over the 

handle tubes just above the joint, as shown in fi gure 1. 

•   To  open  the  canopy,  push  forward  on  the  front  of  the 

canopy. Secure in the open position by pushing downward 

on  the  canopy  stretchers  on  each  side  of  the  canopy.  

Please see fi gure 2.

•   The canopy must be in the closed position prior to folding 

the stroller.  To close canopy, pull upward on the canopy 

stretchers  to  unlock.    Pull  rearward  on  the  front  of  the 

canopy.  Please see fi gure 3.

   Your stroller is now ready to use.

TO  ENSURE  SAFE  OPERATION  OF  YOUR  STROLLER,  PLEASE  FOLLOW  THESE 

INSTRUCTIONS  CAREFULLY.  RETAIN  THESE  INSTRUCTIONS  FOR  FUTURE 

REFERENCE.

Figure 1

Figure 2

Figure 3

TO ASSEMBLE STROLLER

TO SECURE THE CHILD

3

      

WARNING:

  Avoid serious 

injury  from  falling  or  sliding  out. 

Always use the seat belt.   

1. Carefully place the child in the stroller seat and bring the 

seat belt around the child's waist.  Place the crotch strap 

between the child's legs. See fi gure 4.  

2. Insert the male end of each seat belt into the crotch strap 

buckles until snapped into place.  See fi gure 5. and 5A.  

3. Tighten the seat belt to be snug around the child's waist. 

4. To release, apply pressure to both sides of each male clip 

until the clips are released.  See fi gure 6.  This process 

requires a moderate amount of effort so as to prevent an 

accidental release by your child. 

THIS UPRIGHT SEATING POSITION SHOULD 

BE USED ONLY FOR A CHILD THAT CAN SIT 

UP UNASSISTED, APPROXIMATELY 6 MONTHS 

OLD.

Figure 4

Figure 5

Figure 6

Figure 5A

Reviews: