Baby Relax CRIB CHANGER COMBO 2 IN 1 CRIB Assembly Manual Download Page 3

*

*

*

*

*

*

*

*

* Ensure all parts and components are present before beginning assembly.

* Assemble on a soft, smooth surface to prevent damage to product finish.

*

DO NOT

 use power tools.

* CAUTION: Adult assembly required.

* Assembly will require two people.

* Estimated assembly time: 60 minutes.

Check bolts/screws periodically and tighten them if necessary.

DO NOT

 use the changing table if it is damaged or broken.

When used as a changing table, this unit must be used with a changing pad (not provided) equipped with 
safety straps that secure the child to the changing pad as well as straps that secure the pad to the 

changing table.

LIMITED WARRANTY

Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to 
remedy any such defect.  This warranty covers 1 year from the date of original purchase.  This 
warranty is valid only upon presentation of proof of purchase.  This is solely limited to the repair or 
replacement of defective furniture components and no assembly labor is included.  This warranty 
does not apply to any product which has been improperly assembled, subjected to misuse or abuse 
or which has been altered or repaired in any way.  This warranty gives you specific legal rights and 
you may also have other rights which vary from State to State.

Always secure the child to the changing pad using safety straps attached to changing pad.

The maximum recommended weight of the child is 30 lbs (13.60 kgs).

The changing table is to be used with a changing pad measuring 16 inches X 32 inches and not 
exceeding 2 inches in thickness (excluding the height of any contoured edges).

   WARNING

Changing Table

FALL HAZARD - To prevent death or serious injury, always keep child within arm's reach.

Avoid serious injury. Never leave child unattended.

Read all instructions before use of the changing table.  

KEEP INSTRUCTIONS FOR FUTURE USE.

         WARNING: Should this product become damaged, 

and/or components are broken or missing, DO NOT USE.

NOTES

CARE AND CLEANING

Dust regularly with a soft, lint-free cloth to prevent soil build-up.  A damp cloth may be used 
occasionally to clean surface.  Dry immediately.  Do not use any abrasives that may damage finish. 
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage 
wood furniture.

MAINTENANCE

changing table.

Summary of Contents for CRIB CHANGER COMBO 2 IN 1 CRIB

















Reviews: