![background image](http://html1.mh-extra.com/html/baby-lock/gallant-xl/gallant-xl_instruction-and-reference-manual_3260762045.webp)
44 |
www.babylock.com
Over-temperature: The over-temperature icon appears if:
• the machine is being stressed by an obstruction
• the machine is stitching through extremely difficult fabric to sew, or
• the machine is operating in a hot environment.
Power off the machine and allow it to cool down. If the problem
persists, contact your authorized Baby Lock retailer.
Magnetic Encoder: This icon indicates a problem with the main shaft
position sensor.
Please contact your authorized Baby Lock retailer for service.
Service: This icon indicates that the machine should be serviced.
Please contact your authorized Baby Lock retailer for service
X Encoder: This icon shows the X encoder is not fully plugged in.
Turn off the machine then unplug and replug the connector at both the
encoder end and the machine end to ensure it is completely plugged in.
Also check the X encoder (at the back of the carriage) and the cable for
damage.
Clear the screen by pressing any key.