![background image](http://html1.mh-extra.com/html/baby-lock/ellure-plus-blr3/ellure-plus-blr3_instruction-and-reference-manual_3332393014.webp)
12
Operation buttons
The operation buttons help you to easily perform various basic sewing machine operations.
a
“Start/Stop” button
/
Press the “Start/Stop” button to start or stop sewing. The
machine sews at a slow speed at the beginning of
sewing while the button is pressed. When sewing is
stopped, the needle is lowered in the fabric. For details,
refer to “Starting to sew” (page 51).
The button changes color according to the machine’s
operation mode.
b
“Reverse/Reinforcement Stitch” button
Press the “Reverse/Reinforcement Stitch” button to sew
reverse stitches or reinforcement stitches. Reverse
stitches are sewn by keeping the button pressed down to
sew in the opposite direction. Reinforcement stitches
are sewn by sewing 3 to 5 stitches on top of each other.
For details, refer to “Securing the stitching” (page 53).
c
“Needle Position” button
Press the “Needle Position” button to raise or lower the
needle. Pressing the button twice sews one stitch.
d
“Thread Cutter” button
Press the “Thread Cutter” button after sewing is stopped
to cut both the upper and the bobbin threads. For
details, refer to “Cutting the thread” (page 54).
e
Sewing speed controller
Slide the sewing speed controller to adjust the sewing
speed.
CAUTION
Note
z
Do not press
(“Thread Cutter” button)
if there is no fabric under the presser foot or
while the machine is sewing, otherwise
damage to the machine may occur.
z
When cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine. For
details, refer to “Using the thread cutter”
(page 55).
Green:
The machine is ready to sew or is
sewing.
Red:
The machine can not sew.
Orange:
The machine is winding the bobbin
thread, or the bobbin winder shaft is
moved to the right side.
●
Do not press
(“Thread Cutter”
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.
Summary of Contents for Ellure PLUS BLR3
