42
Saving Image Data
Saved data that has been converted to embroidery data cannot be recalled with On Screen
Designer™. To recall data and edit it with On Screen Designer™, save the image data on
USB media before converting it to embroidery data or press
after the conversion to
return to the pattern drawing screen, and then save the data.
1
Insert USB media into the USB port located on the
right side of the machine.
Caution
• Do not insert anything other than USB media into the
USB media port. Otherwise, the USB media drive may
be damaged.
• Do not insert USB media containing pattern data other
than those saved using this application. (Only .pm7 and
.phc data can be used.)
2
Press
.
* If the pattern is displayed in the enlarged area, the enlarged
display will be canceled, then the pattern is saved.
* If the
key or the
key is selected when saving data
before the area thread color key has been selected, the
key will be selected instead, then the pattern is saved.
3
The screen shown at the left appears. If the image
data was saved successfully, the previous screen
automatically appears.
* Saving image data takes approximately 3 seconds.
Caution
Do not turn off the machine while the [Saving] message is
displayed, otherwise saved data may be lost. In addition,
do not try to remove the USB media, otherwise the USB
media may be damaged.
Summary of Contents for Ellisimo Gold II
Page 1: ......
