SEWING THE STITCHES
U
tility
S
titc
h
es
59
3
Dart Seam
!
Select
and attach presser foot “J”.
"
Sew a reverse stitch at the beginning of the
dart and then sew from the wide end to the
other end without stretching the fabric.
*
If automatic reinforcement stitching is preset, a
reinforcement stitch will automatically be sewn at
the beginning of sewing.
a
Basting
#
Cut the thread at the end leaving 50 mm
(approx. 1-15/16 inches), and then tie both
ends together.
*
Do not sew a reverse stitch at the end.
$
Insert the ends of the thread into the dart
with a needle.
%
Iron the dart to one side so that it is flat.
Gathering
Use on waists of skirts, sleeves of shirts, etc.
!
Select a straight stitch and attach presser
foot “J”.
"
Set the stitch length to 4.0 mm (approx.
3/16 inch) and the thread tension to
approximately 2.0 (weaker tension).
*
If you press
after pressing
, the
stitch length will be set automatically to 4.0 mm
(approx. 3/16 inch) and the thread tension will be
automatically set to 2.0.
#
Pull the bobbin and upper threads out by
50 mm (approx. 1-15/16 inches) (see page
25).
a
Upper thread
b
Bobbin thread
c
About 50 mm (approx. 1-15/16 inches)
a
a
b
c
Summary of Contents for ellegante BLG guid
