Baby Lock ECS8, Instruction Manual

Page: 188 / 271

186
Tutorial (Advanced)
■
Printing a Design Page for a multi-
position hoop
If a Design Page for a multi-position hoop is
selected, a complete image of the Design Page is
printed on the first page, followed by an image of
each design section and its sewing information
(dimensions of the embroidery, the hoop position,
the sewing color order and the stitch count), so the
number of pages depends on your design.
• If a 130
×
300 mm Design Page is selected,
the pattern is divided into sections of 130
×
180 mm with each section printed on a
separate page.
• If a 100
×
172 mm Design Page is selected,
the pattern is divided into sections of 100
×
100 mm with each section printed on a
separate page.
The Design Page is printed as described below.
When Actual Size is selected:
On the first page, the entire Design Page is
printed at actual size. (However, for a 130
×
300
mm Design Page, a reduced image of the
Design Page is printed.) Afterwards, the pattern
in each section of the Design Page is printed,
starting with that sewn with the first hoop
installation position, and is followed by the
sewing information for that pattern on separate
pages.
When Reduced Size is selected:
On the first page, the entire Design Page is
printed at actual size. (However, for a 130
×
300
mm Design Page, a reduced image of the
Design Page is printed.) Afterwards, the pattern
in each section of the Design Page is printed,
starting with that sewn with the first hoop
installation position, on the same page as the
sewing information for that pattern.
b
Memo:
When the menu command File – Print
Preview is selected, each section of the
design is displayed as described above.