background image

23

1

Using the twin needle

With the twin needle, you can sew two parallel lines 
of the same stitch with two different threads. Both 
upper threads should have the same thickness and 
quality. Be sure to use the twin needle and the extra 
spool pin.
For details on the stitches that can be sewn with the 
twin needle, refer to “Stitch settings” (page 85).

a

Twin needle

b

Extra spool pin

a

Install the twin needle.

• For details on installing a needle, refer to 

“Replacing the needle” (page 27).

b

Thread the upper thread for the left needle.

• For details, refer to steps 

a

 through 

j

 of 

“Threading the upper thread” (page 18).

c

Manually thread the left needle with the 
upper thread.

Pass the thread through the eye of the needle 
from the front to the back.

d

Insert the extra spool pin onto the end of the 
bobbin winder shaft.

e

Install the thread spool and thread the upper 
thread.

Memo

When setting the thread spool, set it so that 
the thread winds off from the front of the 
spool.

f

Thread the upper thread for the right side in 
the same way that the upper thread for the 
left side was threaded.

a

Thread guide cover

• For details, refer to step 

a

 through 

j

 of 

“Threading the upper thread” (page 18).

g

Without passing the thread through the 
needle bar thread guide, manually thread the 
right needle.

Pass the thread through the eye of the needle 
from the front to the back.

a

b

Only use the twin needle (part code: X59296-
121). Use of any other needle may bend the 
needle or damage the machine.

Never use bent needles. Bent needles can 
easily break, possibly resulting in injuries.

The needle threader cannot be used with the 
twin needle. If the needle threader is used 
with the twin needle, the sewing machine 
may be damaged.

CAUTION

a

Bobbin winder shaft

b

Extra spool pin

c

Thread spool

1

Summary of Contents for A-LINE Grace BL40







































































































Reviews: