2
3
1
To attach bracket to frame:
Unsnap seats
from frame to reveal mounting location.
Use a phillips head screwdriver to attach
bracket screws to frame.
3
Secure outside Velcro canopy straps around
frame and secure to itself.
4
Now secure both canopies together using
center Velcro straps, making sure they go
behind the center bar on the stroller.
2
To attach canopy to bracket: Insert canopy
frame into bracket and attach screws using
a phillips head screwdriver.
Canopy
1
To install front wheel, lay stroller back so handle is resting on floor.
2
Insert the front wheel into the forktips by
aligning the axle flats with the forktip flats.
4
To close V-Brake, pull on cable guide with your
right hand while pushing the cantilever latch
with your thumb. With your left hand push the
other caliper arm toward your right hand and
secure cable guide tube into cantilever latch.
You will need to pull the accordion cable
protector back in order to secure the cable
guide tube into the cantilever latch.
Front Wheel
3
Secure front wheel to frame by turning
the front wheel lever while holding the
lock nut on the opposite side. Tighten
until you feel tension on lever and then
flip wheel lever over so that the word
“closed” is visible. The wheel lever should
face toward the rear wheels to prevent it
from getting caught on something and
releasing during use.