background image

3

IMPORTANT - 

Read these instructions carefully 

before use and keep them for future reference. Your 

child’s safety may be affected if you do not follow 

these instructions.
1   Insert wheel axle into the hole on the underside of 

the Glider Board. The wheel is secure when you 

hear it click. Repeat on other side. 

2   Slide ratchet straps between the lower support 

bar and the brake rods..

3   Push attachment brackets onto lower support bar 

until they clip into place. 

4   Press ratchet lock tab (a) and slide ratchet strap 

through opening (b). NOTE: DO not trap brake 

wire between ratchet strap and lower support bar.

5   Push ratchet strap through until snug. Repeat on 

other side. 

To adjust Glider Board Angle:

Note: Glider board must be parallel to the ground 

or slightly angled toward the stroller before use. 

Depending on your stroller model, you may need to 

adjust the angle. 
6  Push the safety cover away from the tabs. 
7

  

To Raise:

 Press gray tabs on right and left side of 

Glider Board and pull edge up. 

  

To Lower:

 Press gray tabs on right and left side of 

Glider Board and push front edge down. 

8  Pull safety cover back over the tabs. 

To adjust Glider Board Length:

9  Pull handle on the rear underside of Glider Board.

10 Pull out to extend.

11  Push in to shorten.

Storage (while using the stroller):

12  Raise Glider Board and unhook storage straps 

from  underside. 

13  Hook storage straps around rear crossbar of 

stroller frame. 

Note: When stored, make sure the rear of the 

Glider Board is not interfering with the back of the 

stroller seat. Adjust Glider Board length for storage 

if necessary. 

Storage (while folding the stroller):

14  The Glider Board wheels must be removed before 

you can fold the stroller. Follow steps 12 and 13 

of the Glider Board Storage instructions (above), 

then remove the wheels. Press wheel release 

button and gently pull out wheel to remove. 

To Remove Glider Board:

15

  

Press ratchet lock tab and pull ratchet strap out. 

Unclip attachment brackets. 

ASSEMBLY INSTRUCTIONS

•  WARNING: 

Recommended for children from 2 

years old up to a maximum weight of 45 lbs (20kg).

• 

WARNING:

 Never leave child unattended.

•  WARNING: 

Always secure seat recline strap by 

snapping the D-ring to the recline clamp before 

using the Glider Board.

•  WARNING: 

Always ensure the safety covers are 

covering the adjustment tabs prior to use.

•  WARNING: 

Always make sure storage straps 

are fastened to the underside of the Glider Board 

before use. 

•  WARNING: 

Always make sure the ratchet straps 

are securely tightened before use. 

•  WARNING: 

Do not run or skate with this product 

attached to a stroller/pushchair. 

WARNING:

EN

Reviews: