8
9
• If you don’t have good braking
action, simply squeeze the brake
handle five or six times. If the
problem persists, loosen the
brake’s cylinder ring to adjust the
small ring, and then move the
small ring away from the handle
to tighten the cable. (Please do
not over tighten!) To lock the
rings, tighten the cylinder ring
against the handle while holding
the small ring in place.
Hand Brake with
Parking Button
• To use the parking button feature, simply squeeze
the brake handle and push the park brake button.
Brakes
Small Ring
Cylinder
Ring
JOGGER IS PACKAGED
WITH THE HAND BRAKE
ASSEMBLY LOOSE.
TIGHTENING IS NECESSARY
FOR SAFE OPERATION!
• Rotate hand brake assembly upward to a comfortable
position then tighten bolt
(clockwise)
on the hand
brake assembly with supplied allen wrench as shown.
Adjusting the Brake
Rear Wheel
Parking
Brakes
• Simply push brake
pedal down to
engage brake and
lift up to release.
Brake Pedal
Parking
Button
1
Snap seat to frame.
2
Attach bottom part of seat
to footplate with the velcro.
3
Wrap bottom straps around
frame, thread strap through
D-ring and secure.
4
Snap center anchor strap.
5
Attach seat anchor straps
to rear frame uprights.
Seat
NOTE:
Some Joggers are shipped
with the Canopy, Seat and Basket
pre-assembled. Assembly
instructions are given if any
pre-assemble items are removed
for cleaning or replacement.
Performance Double (Assem) 12/16/04 4:08 PM Page 8
