Chicco Car Seat Adaptor
For Single Strollers
The Chicco Car Seat Adaptor is designed to be
used with the mounting brackets on your Baby
Jogger City Mini, City Classic, City Elite, Summit
XC, Summit 360, or F.I.T stroller and your Chicco
Car Seat. This Car Seat Adaptor is only compatible
with this car seat and stroller models.
This Kit Includes:
2 Adaptor Brackets
2 U-Shaped Support Bars
2 Bar Fasteners
1
Remove canopy and seat fabric from frame.
2
Insert Adaptor Brackets into the corresponding mounting brackets on your stroller until they click
into place.
NOTE: The right and left mounting brackets on your stroller are determined by standing in
front of and facing the stroller.
3
Insert U-Shaped Support Bar (labeled HEAD) into the front holes on the Adaptor Brackets.
4
Insert U-Shaped Support Bar (labeled
FOOT) into HEAD Support Bar.
5
Screw Bar Fasteners into holes on the
top of the U-Shaped Supports.
6
Close compression locks by flipping the
red latches down.
7
Secure your car seat onto the stroller
using the safety belt on the Car Seat
Adaptor Brackets.
Adaptor Brackets
Bar Fasteners
U-Shaped
Support Bars
NOTE:
Always close compression locks
and securely fasten the Bracket Adaptor safety
belt over the car seat before operation.
4
6
5
7
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
The sample product shown on this manual may differ slightly from your production quality Car Seat Adaptor.
However, this will not affect the assembly or functionality of your Baby Jogger product.
