6
Place the T-shaped Bar onto the
car seat and fasten to U-shaped
Support Bar using D-Ring and
Velcro strap.
Britax Companion
Peg Perego
Uses the 2 Adaptor Brackets, the U-shaped
Support Bar (facing up) and the T-shaped Bar
Uses the 2 Adaptor Brackets, the U-shaped
Support Bar (facing down), the Straight
Support Bar and the Spring Support Bar
1
Insert right Adaptor
Bracket into the
corresponding mounting
bracket on your stroller.
The Adaptor Brackets
are secure when they
click into place.
NOTE: The right and
left mounting brackets
on your stroller are
determined by
standing in front of
and facing the stroller.
1
Insert Adaptor Brackets into the
corresponding mounting brackets
on your stroller. The Adaptor
Brackets are secure when they
click into place.
NOTE: The right and left
mounting brackets on your
stroller are determined by
standing in front of and
facing the stroller.
5
Connect the Spring Support
Bar by compressing and
guiding it into the open
holes on the U-Shaped
Support Bar.
2
Insert the Straight
Support Bar into the
holes on the inside of
the Adaptor Brackets
and attach left Adaptor
Bracket to mounting
bracket.
3
Open the compression
locks on the Car Seat
Adaptor by flipping the
red latches up.
2
Open the compression locks on
the Car Seat Adaptor by flipping
the red latches up.
3
Insert the U-shaped Support Bar
with the curved end pointing up.
4
Place your car seat onto the
U-shaped Support Bar. Adjust
the U-shaped Support Bar to
the proper length by sliding
the U-shaped Support Bar in
or out, using the car seat to
ensure proper distance. The
car seat should be supported
by the Adaptor Brackets.
7
Once the car seat
is properly positioned,
close the compression
locks by flipping the red
latches down to hold
Support Bars in place.
8
Secure your car seat onto
the stroller using the
safety belt on the Car
Seat
Adaptor Brackets.
4
Insert the U-shaped
Support Bar with the
curved end pointing down.
5
Once the car seat is properly
positioned, close the compression
locks by flipping the red latches
down to hold Support Bars
in place.
7
Secure your car seat onto the
stroller using the safety belt on
the Car Seat Adaptor Brackets.
4
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
5
6
Place your car seat onto
the U-shaped Support
Bar, making sure that
the Spring and Straight
Support Bars engage the
locking mechanisms
where applicable. Adjust
the U-shaped Support
Bar to the proper length
by sliding the U-shaped
Support Bar in or out,
using the car seat to
ensure proper distance.
The car seat should be
supported by the Adaptor
Brackets.
