Nightlight Unit Assembly and Usage
Adult assembly required. Product
requires two AA batteries (not included).
Remove light unit from the light-holder
in the plastic tray of the Snuggle Nest®
by holding the center of the light and
sliding the light straight UP. Unscrew
and remove the battery compartment
lid (F). Insert two AA batteries into the
compartment, noting the postitive and
negative markings for battery positioning
(G). Replace the battery compartment
lid by screwing the lid onto the light in
the original closed position. DO NOT
overtighten. Replace nightlight by sliding
it back into light holder at the head of the
Snuggle Nest.®
LIGHT: To operate the light, press the center of the light lens and
the light will come ON (H). Press the lens again and the light will
go OFF.
Insert 2 AA batteries
Unscrew lid
Touch light on/off
5
G
H
F
WARNING!
The nightlight product is not a toy. Do not allow children to play
with nightlight. Use with proper adult supervision only. ALWAYS install the light on the Snuggle Nest
®
only as instructed. NEVER mix old and new batteries. NEVER mix alkaline, standard, or rechargeable
batteries. ALWAYS remove batteries when light is stored for an extended period of time or when
batteries are exhausted. Dispose of exhausted batteries properly.
Cleaning
The Snuggle Nest® cover and sheet are machine washable. Always
wash in cold water and dry on low heat to keep your Snuggle Nest®
in the best condition. Do not use bleach. The vinyl mattress cover and
the plastic base can be cleaned with a wet cloth.
