background image

5

It is very important to descale this appliance every 4 weeks to ensure that it continues to work properly. Pour all remaining 
water out of the water chamber. To descale, mix 2oz (60ml) of white vinegar with 4oz (120ml) of cold water into the water 
chamber, and then run one heating cycle on setting 5 until any scaling has been removed. Please ensure proper ventilation 
when descaling with vinegar.

Descaling the Bottle Warmer

Defrosting Frozen Milk Pouches

Then press             to begin heating.

To use the defrost setting, place a frozen milk pouch into the warmer and fill water to the line of the milk in the pouch.

Cleaning the Bottle Warmer

Unplug the bottle warmer and 
remove the bottle tray from the 
base.

Carefully pour out any remaining
water inside the base.

1

2

Wipe all parts dry before next use. 
If necessary, wipe base exterior 
with damp cloth. 

Do not use scouring 

pads, abrasives or solvents for cleaning.

3

2

Always allow warmer to cool before cleaning

Press the             temperature setting until the “F” icon is displayed on the LCD screen,

6

Possible Remedy

Warmed bottle is too cold.

(Quick & Steady warm 

settings).

Try a higher setting according to your preference.

Ensure that bottle tray is lined up with bottle tray slots in the

bottle warmer.

Ensure that plug is securely inserted into the power outlet.

Troubleshooting

Condition

Possible Cause

Unit will not power on.

Unit is unplugged.

is held for too long.

Bottle Tray is misaligned inside bottle warmer.

Lid will not close.

Press        to turn on the unit. Do 

not

 hold down the button.

Warmed bottle is too hot.

(Quick warm setting).

Not enough water added to bottle warmer.

Setting time is too long or incorrect setting chosen.

Add water to the marked Quick Warm fill line.

Try a lower setting according to your preference. 

Warmed bottle is too hot.

(Steady warm setting).

Not enough water added to bottle warmer.

Setting time is too long or incorrect setting chosen.

Add water until it matches the height of liquid in your bottle.

Try a lower setting according to your preference.

Too much water added to bottle warmer.

Setting time is too short or incorrect setting chosen.

Reduce water in bottle warmer to the required height based 

on your setting. (Refer to page 5).

“E5” error displays on machine

or “Error” message displays on 

app.

Little or no water has been added to the machine.

Add cold water to the machine and let it sit and cool for

5 min. Empty out cold water and restart the bottle warmer. 

Make sure to add the appropriate amount of water needed 

for warming. 

E1, E2, E3, or E4 error displays 

on machine.

Internal malfunction in machine.

Please contact customer service before continuing to use 

your machine. 

If you can not remedy problems with the machine by using the troubleshooting chart above, do not return 

your warmer to the store, please contact Customer Service at: 1-800-667-8184 or by email: [email protected].

The limited warranty is valid only on products bought through authorized resellers and used in Canada. Buying through an unauthorized reseller or using this product outside of 
Canada automatically voids this warranty. This warranty is available to consumers only. You are a consumer if you own a Baby Brezza breastmilk warmer that was purchased 
at retail for personal, family or household use. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners. 
We warrant that your Baby Brezza breastmilk warmer will be free of defects in material or workmanship under normal home use for one year from the date of original 
purchase. Customer will be required to present original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the 
purchase date for purposes of this warranty will be the date of manufacture. If your Baby Brezza breastmilk warmer should prove to be defective within the warranty period, 
we will replace it, if we consider it necessary. To obtain warranty services, please call Customer Service at: 1-800-667-8184 or by email at: [email protected].

Warning:

 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

LIMITED 1-YEAR WARRANTY

Summary of Contents for BRZ0084

Page 1: ...etting 7 8oz 240ml setting 8 9oz 270ml setting 9 1oz 30ml 2oz 60ml setting 1 3oz 90ml setting 2 4oz 120ml setting 4 5oz 150ml setting 4 6oz 180ml setting 5 7oz 210ml setting 7 8oz 240ml setting 7 9oz 270ml setting 7 Cold Temperature REFRIGERATED 39 F 4 C Steady Warm Glass Bottle Plastic Bottle 1oz 30ml setting 1 2oz 60ml setting 2 3oz 90ml setting 3 4oz 120ml setting 4 5oz 150ml setting 5 6oz 180m...

Page 2: ... fit contact a qualified electrician Do not attempt to modify the plug in any way 15 To disconnect turn appliance off then remove plug from wall outlet 16 Make sure machine is turned off before unplugging 17 A short power supply cord is provided to reduce risks of becoming entangled in or tripping over a longer cord Longer detachable power supply cords or extension cords are available and may be u...

Page 3: ...the bottle warmer to cool before warming the next bottle Fill warmer with water to level of milk in the bottle Fill warmer with water to the Quick Warm Fill line use measuring cup included with warmer 3 Press to turn on machine 7 Warmer will beep when bottle is ready Remove bottle immediately after warming is complete swirl bottle gently and check temperature before feeding baby 7 Warmer will beep...

Page 4: ...ded to bottle warmer Setting time is too short or incorrect setting chosen Reduce water in bottle warmer to the required height based on your setting Refer to page 5 E5 error displays on machine or Error message displays on app Little or no water has been added to the machine Add cold water to the machine and let it sit and cool for 5 min Empty out cold water and restart the bottle warmer Make sur...

Reviews: