PAGE 5
DAVENPORT CRIB ASSEMBLY MANUAL • ©2014 Baby Appleseed
®
All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
5A. Attach the rear drawer panel to the drawer using 3 large wood screws. DO NOT USE POWER
TOOL. DO NOT OVER-TIGHTEN. 5B. Slide drawer boards along the grooves of the panels.
5.) Attach drawer back to left,
right and center drawer panels.
Insert drawer boards.
Hardware needed:
6.) Attaching front panel to drawer
Hardware needed:
Line up drawer face to the dowels located on the ends of the left, center and right drawer panels. Use 5
wood screws to secure the drawer face to the pre-installed angle brackets.
x 3
LARGE WOOD SCREWS
x 5
SMALL WOOD SCREWS
Left Drawer P
anel
Middle Drawer P
anel
Drawer Board
Drawer Board
Right Drawer P
anel
Front Drawer P
anel