9. There is an additional optional setting to cover an
extreme emergency scenario. When an Alarm raised
is not responded to by the user for whatever reason,
within a few minutes an alarm message can be sent
to an associated user (grandparent, nanny or
neighbour). Follow the instructions below if required.
a) Press CONNECT then b) Press
”SHOW MY QR
CODE” This will display the device’s unique QR
Code. Then on the associated users phone press
The
“SCAN USER QR
CODE” bar and scan the
QR Code on the Main
user’s phone. This also
needs to be done by the
associated user :
c) Press CONNECT to
d) Press
“SHOW MY
QR
CODE” the QR code
displayed
should
be
scanned by the Main User.
Now both the main user
and associated users
are synchronized together which will ensure that
when one of the monitored parameters go out of
range, and a raised alarm to the user has not been
responded to, the associated users will receive an
alarm alert notification message with informing
them that the infant needs attention and the GPS
coordinates of where the infant is.
