©2023 Babcock-Davis
Rev 04/23
Installation & Ope Maintenance
eleGRIL Level Bed, Mechanically Fastened
Models: BGE38H, BGE58H, BGE98H. Frames: BFE38HLBM, BFE58HLBM, BFE98HLBM
5
Great Products. Better Partners.
Babcock-Davis is a leader in roof hatches, smoke vents and safety railings for the commercial roofing market. We also manufacture architectural
access and safety-related building products for commercial structures. Babcock-Davis provides local connections through a broad distribution
network to accelerate and simplify the building process for contractors and building owners, offering hassle-free services including access to
technical experts, REVIT tools for BIM, HPDs for LEED v4, 3-part specifications and AIA-accredited continuing education courses.
OTHER MOUNTING OPTIONS
EZ Loc
Surface Block
Hidden Slotted Tab
1. Cuts should be made using a grinder with a new wafer wheel. CGW 6 x .045 x 7/8 is
recommended. Take particular care to deburr ends of bars and supports after cutting.
2. Set sections into place being sure that all wires and supports align. Mark all surface
fastener locations on the surface for each section.
3. Remove sections and drill all fastener holes at marked locations in base and install
lead anchors to bed.
4. Place grates back into their locations and fasten down using the flathead machine screws
supplied with grating. Start each screw in its location and once engaged snug all fasteners
tightly starting from the center and working outwards in a circular manner. Repeat for all
sections.
MAINTENANCE
Continued maintenance is critical to the long-term safety and performance of the grille.
Remove the grille and clean the recess periodically to prevent the surface from becoming
uneven. Debris build-up within the recess could lead to deflection in the grille and may
possibly cause tripping hazards.
Gloves are recommended when handling the grilles to protect
against sharp edges
.
•
General cleaning can be done from the surface with a vacuum and brush to remove
debris between the bars.
•
Surface wires can be cleaned with a non-
ferrous cleaner such as 3M’s Scotch Brite™
.
•
Do not use steel wool or abrasive pads. The steel in these products will embed in the
wires and subsequently rust.
QUESTIONS?
For more information on installation, repair, or replacement, please contact Customer &
Sales Support at 888-412-3726 or visit
