background image

Cables

 

Cables   will   stretch   during   regular   use   of   the   bike.   We   advise   you   to   regularly   
readjust   and   lubricate   the   cables   to   optimize   their   effectiveness.   You   should   
preferably   lubricate   your   brake   cables   before   the   weather   becomes   too   cold   and   
starts   freezing.   This   will   prevent   the   inner   cable   from   freezing   to   the   outer   cable,   
which   will   reduce   the   effectiveness   of   the   cables.

 

   

Adjusting   the   brakes   and   gears

   

Adjusting   the   brakes   can   easily   be   done   yourself   using   the   adjusting   bolts   of   the   
disc   brakes.   To   adjust   the   rear   brake,   turn   the   adjusting   bolt   away   from   the   brake   
hub.   By   doing   this,   you   increase   the   pressure   on   the   brake   cable.   The   parking   
brake   is   linked   to   the   front   brakes.   To   improve   the   effectiveness   of   the   parking   
brake   you   should   tighten   both   front   brakes.   You   can   do   this   by   turning   the   
adjusting   bolts   away   from   the   brake   hub.   Make   sure   to   adjust   both   front   brakes   
equally.   You   can   adjust   the   gears   by   turning   the   end   of   the   brake   cable,   which   is   
attached   to   the   handle   bars.   To   adjust   the   highest   gear   you   should   tighten   the   
adjusting   bolt,   by   the   wheel,   and   to   adjust   the   lowest   gear   you   should   loosen   the   
adjusting   bolt.

   

   

Lubricating   the   chain

   

You   should   maintain   your   bike   chain   by   using   a   chain   lubricant.   Slowly   turn   the   
crank   (just   turn   the   bike   pedal)   backwards   while   lubricating   the   chain.   When   
using   lubricant,   you   should   drip   it   onto   the   chain   one   link   at   a   time.   When   you   
have   lubricated   the   chain,   turn   the   crank   forwards   and   backwards   to   ensure   that   
the   lubricant   is   well   spread   out   over   the   chain.   Then   use   a   dry   piece   of   cloth   to   
remove   excess   lubricant   from   the   chain.   The   lubricant   should   be   on   the   inside   of   
the   chain,   not   on   the   outside.

   

   

Tires

   

You   should   carefully   monitor   the   air   pressure   of   your   tires.   By   regularly   inflating   
the   tires,   the   bicycle   will   continue   to   feel   light   when   riding   and   the   tires   will   last   
longer.   The   tires   can   be   inflated   using   a   bicycle   pump   with   a   woods   valve   
adaptor.   The   tires   on   a   Babboe   are   Dutch   and   are   not   standard   tires.   Woods   valve   
adaptors   can   be   purchased   in   most   local   bike   shops.

   

   

Reviews: