BAB TECHNOLOGIE DUODMX Series Manual Download Page 61

Page: 61 / 75

DUO

DMX

GATEWAY

DUO

DMX

GATEWAY

BAB TECHNOLOGIE GmbH 61



> Connect

. With this button, the selected DUO

DMX

GATEWAY is connected to the control. The

selected DUO

DMX

GATEWAY is marked in the list at the right margin with an orange line.

6.3.1

CONNECTING THE APP WITH THE DUO

DMX

GATEWAY

Approach:

MANUAL.

Enter Gateway manually.

If the IP address of the DUO

DMX

GATEWAY is available, it can be entered manually. (See Figure 59:

Manual IP address Input)

Approach:

AUTOMATIC.

Start Gateway search.

The DUO

DMX

GATEWAY also has a

Discovery

function. It is used for automatically searching for

DUO

DMX

GATEWAYs. (See Figure 57: DUO DMX APP Search process activated)

Select the DUO

DMX

GATEWAY to be controlled by clicking on it. The orange line at the right side of the

list shows the selected DUO

DMX

GATEWAY.

Press >

Connect

to connect the APP with the DUO

DMX

GATEWAY. The configuration data are

automatically downloaded in this process.

Figure 58: DUO DMX APP Gateway selection

Figure 57: DUO DMX APP Search process activated

Summary of Contents for DUODMX Series












































































Search results

Summary of Contents for DUODMX Series

Reviews:

Related manuals for DUODMX Series

Brands by name

Popular brands

BAB TECHNOLOGIE DUODMX Series, Manual

Search results

Summary of Contents for DUODMX Series

Reviews:

Related manuals for DUODMX Series

Brands by name

Popular brands