12
Manual: FlipMirror II
www.
baader-planetarium
.com
Strain Relief for Cables
The two screws on the side of the housing can be used
to attach additional accessories. You can, for examp-
le, connect a strain relief holder for cables by forming
a loop out of a small plastic strip or alternatively
purchase a finished cable holder.
Motorization
The two screws and the flat recess in the side of the
housing are intended for the connection of a future motorization, e.g. in combination
with the Steeldrive II motor focusing unit
# 2957165
. It can be connected via a toothed
belt which runs over the recess on the knob of the BFM II.
The Future
We have tried to show you examples of how the BFM II can be used. Of course, there
are many more possibilities, which we will present in due course and in future blog
posts on our website.
To stay up to date, why not sign up for our newsletter at
www.baader-planetarium.com/en/newsletter
.
A small plastic loop can act as strain relief
for cables
All technical specifications in this manual are subject to change without notice, we reserve the right for errors.
© 2019 Baader Planetarium GmbH, Mammendorf. Except for brief quotations in critical articels or reviews, no
reproduction of this manual, in any form, in whole or in part, may be made without written authorization of
BAADER PLANETARIUM
Zur Sternwarte 4 • D-82291 Mammendorf • Tel. +49 (0) 8145 / 8089-0 • Fax +49 (0) 8145 / 8089-105
www.baader-planetarium.com • [email protected] • www.celestron.de
G
M
B
H
The BFM II is prepared for future motorization.
The selection knob has a recess for a drive belt.
