BA Systems—Petershvilevej 1—DK-3200 Helsinge—http://www.basystems.dk
69
BAS 918S/929S
Manual
Regulation mode:
The display will now show the diagram of the controlling scheme in the active mode. Any
measured values will be visible.
By pushing the button, you will enter the underlying menu structure. Once entered, setup
on timers, current time, setpoints, Network parameters, aso. may be changed. Also
measured values and component status may be listed. To return to the scheme diagram
in active mode, a long push must be entered. A button push, combined with scrolling will
have the same effect, and exit the menu mode.
In menu mode the
“Info”
screen will display IP-addresses and configuration options for
this. Configurations must be made to support the actual network segment. This way the
controller web page and data may be accessed from the network, either from a local or
remote IP client. In other words a WEB browser may now be used to display the control-
ler web page. The web browser may be run from a PC or a mobile unit. On mobile units a
dedicated application must be installed.
In menu mode the
“Clock”
screen will enable configuration of actual date, time and time-
zone. Also used language for the controller may be configured.
Besides from the “Info” and “Clock” screen, menu mode will show all data available for
the active regulation scheme and enable any configuration option.
In the following, all menu screens will be shown and described in details.
BAS918S
12:38 11/08/13
12.8 °C
43.1 °C
31.8 °C
33.8 °C
