0800 833 538
www.bapumpsandsprayers.com
TSX400 PA430
Tank:
400 litre UV stabilized and impact resistant polyethylene tank.
Pump:
Bertolini PA430 pump, 40 lpm and 580 psi
Engine:
Honda GX160
Hose & Reel:
50 metre maxi reel
Spray Gun:
SPOT300
Filter:
Arag 32mm, 50 Mesh Filter
Controls:
Karin two tap pressure regulator with 40 BAR spring
Recommended Operating Pressure:
Spot Spraying: 100-400 psi Boom: 1-6BAR
XP Kit: 1-3 BAR
Installation
Unpack the sprayer and check all parts are included and nothing is damaged. Items
included for each model are listed in the below chart.
Item
12 VOLT
POLY2030
PA430
Tank with pump
Battery cable assembly
Spray Hose & Reel
Spray Gun
Operators manual
PLEASE CHECK VEHICLE MANUFACTURERS SPECIFICATIONS FOR COMPATIBILITY
BEFORE FITTING YOUR SPRAYER
Connection to 12-volt DC supply (12 Volt Model Only)
The sprayer requires a 12-volt DC power source. A 2-metre loom is provided to allow the
sprayer to be connected to the 12-volt DC battery. The red wire is positive and the black is
negative. An on/off switch is fitted to the sprayer to allow the sprayer to be disconnected
from the 12-volt source to prevent the accidental drain of power. The switch also allows the
pump to be shut down when the tank is empty preventing overheating and damage to the
pump. It is recommended that if installing the sprayer on an UTV or any vehicle that a 10
amp fuse be installed to prevent any potential damage to the electrical system on the
vehicle. Consult your vehicle instruction manual for the correct electrical connection.
To avoid damage to the pump ensure
the red wire is connected to the
positive battery terminal.
To avoid fire do not remove the fuse
and ensure the wiring loom is not
located near hot engine parts or the
exhaust.
X
X