B52 ARIES PLUS Operating Instructions Manual Download Page 3

B52 – Aries Plus                                                                                                          http://www.b52audio.com

 

B52 Aries Plus                 OPERATION INTRODUCTION                          Page 2 of 3 

conveniently. 

11.

 REMOTE SHOCK SENSOR BY PASS (remote selectable) 

When siren alarming, pressing 

 +  simultaneously to shut shock triggering, 

parking lights flash 3 times mean by shut sensor. But after disarming, the system will 

resume the shock trigger function automatically when you arm again. 

12.

 INTRUSION MEMORY & NOTICE

 

If the main unit was triggered in the last arming mode, the system will show you by 

sound and light as below:

 

Shock sensor was triggered 

Siren chirps 3 times, parking lights flash 2 times 

Door & ignition was triggered 

Siren chirps 4 times, parking lights flash 2 times 

 

13.

 Anti-Hijacking 

If you in danger of being robbed during you driving press 

 button once, parking 

lights flashing, press 

 button within 10 sce. LED flashes quickly, siren alarming 

after 15 sec, parking lights flash continuously, LED keep lighting, after 10 sec. starter 

force to cut the power. Only press 

  button over 2 sce to disarm. 

Anti-Hijacking Setting by Remote 

In disarming mode, open the door, Turning the ACC to ON position:

 

Function 

Setting / Transfer 

Siren Chirp Once 

Siren Chirp Twice 

Anti-Hijacking 

Pressing 

 for 2 sec. 

With 

Without 

With signal of 

  as factory default. 

 

14.

 CODE  LEARNING 

This system can be learned 4 different transmitters every time. Process as following:   

1)  In disarmed, open the doors, pressing reset switch for 5 times, in the fifth times 

hold to pressing the reset switch. At this time, the siren chirps once and LED 

keeps light to indicate that the system has entered into the learning code mode. 

2)  Pressing any button of remote controller being learned. Siren chirps once to 

show that the remote controller is learned successfully. 

3)  Repeating step 2 to program the second, third and fourth transmitter code.   

4)  After learning the remote controller you need, release the reset switch to exit the 

learning mode. 

NOTICE

: Every time learning new transmitter, formal code (old transmitter) will be erased, 

hence old transmitter must also learning again when new transmitter need to 

learn. 

 

 

 

 

 

Summary of Contents for ARIES PLUS











Reviews: