b4Adventure • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS? [email protected] •
www.b4adventure.com - DC:102919
2
SWING ASSEMBLY:
• Start by sliding the foam/metal bars into the 4 sleeves sewn into the outter portion of the swing to create a circular
shape.
• NOTE: all 4 bars should be facing the same direction so that the male/female connectors match up.
• Your swing should contain 2 ropes, each with 2 connecting rings at the bottom of each end. Lay the rope out with
each end adjacent to eachother at the connection points of the metal frame.
• Slide the plastic rings over the female ends of the metal bars.
• Make sure the ropes are not twisted, they should create an upside down V shape when the swing is fully assembled.
• Connect all the male and female ends together to create a complete circle.
• NOTE: You may need to push the foam away from the connection point to make room for assembly
• You should hear a “click” sound once the bars are secured.
• BE SURE TO CHECK ALL CONNECTION POINTS TO ENSURE THEY ARE FULLY LOCKED AND SECURED
BEFORE USING THE SWING!
